Acrylic courts are applicable to indoor and outdoor tennis courts, basketball courts, badminton courts, and other sports venues.

Product features of acrylic courts:

1. Colorful and bright colors;

2. Water-based raw materials, green and environmentally friendly products;

3. Easy to construct and adaptable to the climate environment;

4. High weather resistance, not easy to age, long service life, good sun resistance, deep coloring, and color does not fade for a long time;

5. Excellent wear resistance and anti-slip properties, not easy to powder;

6. Good elasticity, not easy to crack, and comfortable sports feel;

7. Strong adhesion, high peeling strength, not easy to delaminate, good air permeability, not easy to bubble;

8. Convenient daily maintenance and low cost.

Specific construction:

After the completion of the infrastructure construction, according to some previous embedded facilities, install the fence and lamp posts around the court. Although there are some different treatment methods for different foundations, and the laying of each product is not the same, in general, the surface laying mainly has the following steps:

1. Clean and repair the basic site: Repair some potholes and depressions, then sweep or flush the entire site. It should be noted that the repaired site must be dry (usually 24 hours) before construction can continue.

2. Lay the bonding layer: A layer of adhesive needs to be spread on the surface of the foundation, which can be tightly bonded to the cement surface and tightly combined with the plastic material of the surface layer, and can also prevent debonding, peeling and other problems.

3. Lay the foundation reinforcement layer: In order to enhance the strength, flatness and service life of the site, the main raw materials of the plastic surface layer, acrylic acid, quartz sand and water are mixed in a certain proportion to form an emulsion, and evenly laid on the site. 4. Lay the filling layer: Use the acrylic color layer base material to add appropriate quartz sand and stir and mix to lay it. The role of adding quartz sand is not only wear-resistant, but also can adjust the speed of the ball according to the amount used. 5. Lay the surface oil: It is mainly composed of acrylic surface oil mixed with a certain proportion of water, and evenly spread on the filling layer. It has bright colors, resists UV fading, and has good wear resistance.

Step 5: Draw lines and hang the net.

After the topcoat is laid, the next step of the plastic surface layer is to draw lines. Install the net post, hang the tennis net and the center tie.